manualshive.com logo in svg

Teledyne 440, System Manual, Page: 80 / 256

Share
Download
Teledyne 440 System Manual Download Page 80

5 – Operating Software

5-14

© Teledyne TSS

DPN 402196 Issue 4.1

 NOTE

It is recommended that you save a configuration file for each survey. You can then 
restore this configuration file to give the settings for the next job.

5.3.2 View Menu

5.3.2.1 Run Window

The Run Window is the most important and informative display of the 440 System. Anyone who will 
operate or maintain the system should therefore spend some time to make themselves familiar with the 
layout of the window and the information that it shows.

 

Figure 5-5: DeepView - Run Window

Controls and Features of the Run Window Controls 

❐

The 

Title Bar

 shows the names of the program and of the window. The right-hand end 

includes the standard buttons to minimise, maximise and close the main DeepView window.

❐

The 

Menu Bar

 includes the five menu headers described under 

section 5.3.1 "Menu com-

mands" on page 5-11

. To access the menu and sub-menu commands, click on them or use the 

appropriate hot-key combination – [ALT]+[

underlined hot-key character

s]. The Menu Bar also 

includes buttons to minimise, maximise and close the Run Window.

❐

The 

DeepView Toolbar

 includes the buttons described in 

section 5.3.4 "Toolbars" on page 5-

26

. These tools control the functions of the DeepView for Windows program.

❐

The 

Run Window Toolbar

 includes the buttons described under ‘Run Window tools’ on 

page 5-14. These tools control functions within the Run Window only.

Summary of Contents for 440

































































































































































































































































Reviews:

No comments