manualshive.com logo in svg

Teledyne 440, System Manual, Page: 103 / 256

Share
Download
Teledyne 440 System Manual Download Page 103

5 – Operating Software

DPN 402196 Issue 4.1

© Teledyne TSS

5- 37 

Figure 5-24: Recovery complete before reboot

9.

When the Reinstall procedure is complete remove the Recovery USB from the SDC10 and 
Press Enter to restart the SDC (

Figure 5-24

).

10. After the system restarts reinstall DeepView for Windows.

5.8 Reinstall DeepView for Windows Procedure

Follow these steps to reinstall the DeepView for Windows software:

1.

Select the Windows Start menu, and then select Control Panel, and Programs and features

2.

Select the DeepView for Widows entry in the list of installed programs, and select Uninstall. If 
there is more than one DeepView entry in this list you must uninstall them all.

3.

In the Windows File Manager, select the folder C:\Program Files\TSS, and delete the subfolder 
DeepView for Windows.

4.

Insert the software USB, and run the installer file DeepView_Install.exe (the exact name of this 
file may vary.

5.9 PC Software Installation

Teledyne TSS TSS supplies a USB pen drive (memory stick) containing the DeepView for Windows 
software with the 440 System. This is in addition to the USB pen drive for system recovery (see 

section 

5.7 "System Recovery Procedure" on page 5-31

). You may install this software, under licence, on a 

separate PC to support the main installation on the SDC or to replay an internally logged data file. The 
following instructions explain how to install the software on a separate PC.

Summary of Contents for 440

































































































































































































































































Reviews:

No comments