manualshive.com logo in svg

Teledyne 440, System Manual, Page: 71 / 256

Share
Download
Teledyne 440 System Manual Download Page 71

5 – Operating Software

DPN 402196 Issue 4.1

© Teledyne TSS

5- 5 

Figure 5-2: System Configuration Wizard - Summary

DeepView will now be configured to operate with the 440 System.

Before clicking on ‘Finish’ you have tick options to select:-

❐

Show the pre-dive checklist when the System Configuration Window is closed.

❐

Whether the System Configuration Wizard runs when DeepView for Windows starts.

 NOTE

If the box is checked, the System Configuration Wizard will be run when 
DeepView for Windows starts. If the box is not checked and if a configuration file is 
available, the configuration file will be used to configure DeepView for Windows.

DeepView stores the configuration details automatically in an initialisation file when DeepView is 
closing down. This allows the System to establish the same configuration when you next power-on the 
SDC – provided it recognises the data format arriving from the SEP as being compatible with the 
stored configuration details. This means that you should power-on the SEP before you power-on the 
SDC.

Summary of Contents for 440

































































































































































































































































Reviews:

No comments