manualshive.com logo in svg

Teledyne 440, System Manual, Page: 104 / 256

Share
Download
Teledyne 440 System Manual Download Page 104

5 – Operating Software

5-38

© Teledyne TSS

DPN 402196 Issue 4.1

 NOTE

If you do not need to install the software on a PC or on the SDC, go directly to sec-
tion 5.1 "Power-on Procedure" on page 5-1 for instructions to begin using the 440 
System and DeepView for Windows.

Before you install the software it is recommended that you read the readme.txt file on the USB pen 
drive which describes any enhancements or issues to be aware of prior to installing the software:

1.

Insert the USB pen drive into a suitable USB port on your PC.

2.

The software should start automatically. If it does not, within the Windows environment select 
‘My Computer’ and the respective drive for your USB port. Within the contents of the USB pen 
drive you will find the setup program which automatically installs the software.

3.

To use DeepView for Windows, double click on the Teledyne TSS icon that the installation pro-
gramme places on your Windows 7 desktop.

 NOTE

Take the following precautionary measures to maintain the SDC and your PC in 
optimal condition:

❐

Check all the drives on your PC for viruses using current versions of an 
approved anti-virus program. 

❐

Perform a Windows disk check and a defragmentation session regularly. 

❐

Follow the correct procedures to close down Windows and power-off the 
SDC and your PC.

❐

NEVER install unauthorised software on the SDC.

❐

NEVER make any alterations to the Windows registry unless you are entirely 
certain that you know what you are doing, and have backed up the registry 
files ‘system.dat’ and ‘user.dat’. Inappropriate modifications to the Windows 
registry can prevent the SDC from operating.

Summary of Contents for 440

































































































































































































































































Reviews:

No comments