Teledyne Analytical Instruments LXT-380, Instructions Manual

Page: 13 / 104

LXT-380 Universal Transmitter
Teledyne Analytical Instruments
viii
4.0.1 AUTO CALIBRATION DESCRIPTION 37
4.0.2 STANDARDIZE CALIBRATION DESCRIPTION 38
4.0.3 MANUAL CALIBRATION DESCRIPTION 38
4.1 pH CALIBRATION PROCEDURES 39
4.1.1 AUTO CAL USING pH 4.01, 7.00, 10.00 BUFFERS 39
4.1.2 AUTO CAL USING OTHER PH BUFFERS 40
4.1.3 STANDARDIZE 40
4.2 ORP CALIBRATION PROCEDURES 41
4.2.1 AUTO CAL WITH QUINHYDRONE 41
4.2.2 STANDARDIZE 41
4.3 PION CALIBRATION PROCEDURES 42
4.3.1 AUTO CAL USING 1, 10, 100 PPM SOLUTIONS4.3.2 42
4.3.2 AUTO CAL USING NON-DECIMAL PPM SOLUTIONS 42
4.3.3 STANDARDIZE 43
4.4 SP3X DISSOLVED OXYGEN CALIBRATION
PROCEDURES
43
4.5 CONDUCTIVITY SENSORS 45
4.5.1 AUTO CAL USING AIR AND CONDUCTIVITY
STANDARD 45
4.5.2 STANDARDIZE 46
4.6 TDS CONDUCTIVITY SENSORS 46
4.6.1 STANDARDIZE 47
4.7 RESISTIVITY SENSORS 47
4.7.1 AUTO CAL USING AIR AND MEG-OHM PROCESS
WATER 48
4.7.2 STANDARDIZE 48
5.0 MAINTENANCE ...................................................................... 49
5.1 CLEANING 49
5.2 REPAIR/SERVICE 49
6.0 TROUBLESHOOTING ............................................................ 51
7.0 PARTS AND ACCESSORIES ................................................ 53
7.1 REPLACEMENT PARTS 53