Teledyne Analytical Instruments LXT-380, Instructions Manual

Page: 33 / 104

Installation LXT-380 Universal Transmitter
Teledyne Analytical Instruments
14
2.2.3 WIRING, SENSOR SP3X
Mount the SP3X sensor into the process as needed. Route the
sensor cabling and attach the connector as follows (See Figure 2-4 SP3X
Sensor Connector Wiring): Slide parts onto cable including Backshell,
Clamping Cage, Gromet and Shielding Ring. Strip wire insulation as
indicated below and slide into Housing. Gently tighten the Backshell to
the Housing to fix the cable. Insert the individual wire conductors into
the location identified:
White=1; Red=2; Black=3; and Green=4. Tighten the four (4)
screws to secure the conductors. Slide the Housing forward and attach it
to the Plug assembly. Tighten the Housing and Backshell to secure the
connector. Insert the plug into the Barrier and rotate the knurl counter-
clockwise to complete the installation.
Figure 2-4: SP3X Sensor Connector Wiring