Teledyne Analytical Instruments LXT-380, Instructions Manual

Page: 53 / 104

Operation LXT-380 Universal Transmitter
Teledyne Analytical Instruments
34
Location: CONFIG → XMTR → LCD → LABELS → TAG
3.4.4 SENSOR NAME
Two 16 character lines are available for naming the Sensor, Upper
and Lower case characters, Numbers and Punctuation are available. The
information entered will be displayed in the INFO screen. Entry is
accomplished by scrolling through the alphanumeric list with the ▲
(forward →) and ▼ (backwards ←) arrows to the character of choice
and then pressing
NEXT to advance the cursor to the next digit.
Pressing and holding the ▲or ▼ keys will initiate two speed auto
scrolling. Press BACK to exit the screen.
Location: CONFIG → XMTR → LCD → LABELS → SENSOR
3.4.5 PASSWORD PROTECTION
PASSWD Enter a 4 character password to protect access to MENU
Level, CAL Menu, CONFIG Menu and SIM Menu
(simulate). Each level can be turned ON or OFF and can
have a unique password. Upper Case Characters and
Numbers are available for use.
Place the cursor in front of the level to be changed and
Press OK . Move the cursor to ON and press OK to change
the password status from OFF to ON.
Entry is accomplished by scrolling through the
alphanumeric list with the ▲ (forward →) and ▼
(backwards ←) arrows to the character of choice and then
pressing
NEXT to advance the cursor to the next digit.
Pressing and holding the ▲ or ▼ keys will initiate two
speed auto scrolling.