Teledyne Analytical Instruments 3020 M, Operating Instructions Manual

Page: 25 / 107

Introduction Model 3020M-ATEX
Teledyne Analytical Instruments 2

Versatile analysis over a wide range of applications.

Microprocessor based electronics: 8-bit CMOS
microprocessor with 32 kB RAM and 128 kB ROM.

Three user definable output ranges:

Standard ranges: 0-5% through 0-100% (std.
sensor).

Optional ranges: 0-1% though 0-100% (optional
sensor).

Auto Ranging allows analyzer to automatically select the
proper preset range for a given measurement. Manual
override allows the user to lock onto a specific range of
interest.

Two adjustable concentration alarms and a system failure
alarm.

Extensive self-diagnostic testing, at startup and on demand,
with continuous power-supply monitoring.

RS-232 serial digital port for use with a computer or other
digital communication device.

Four analog outputs: two for concentration (0-1 VDC and
isolated 4–20 mA DC) and two for range identification.

Explosion proof housing ATEX/IECEx certified for use in
II 2G ExD IIB+H2 T6 Gb hazardous environments.

316SS tubing with 316SS and 303SS fittings.

Internal gas filter.

316SS flame arrestors (ATEX, IECEx II2C).

6 mm user gas connections

1” and 3/4” feedthroughs for electrical cable entry into the
enclosure.
1.4 Model Designations
3020M: Standard model.