Teledyne Analytical Instruments 3020 M, Operating Instructions Manual

Page: 19 / 107

Model 3020M-ATEX
Teledyne Analytical Instruments viii
2.3 Cross interference 15
2.4 Sample System 16
2.5 Electronics and Signal Processing 18
2.6 Temperature Control 18
Installation ................................................................................... 21
3.1 Unpacking the Analyzer 21
3.2 Mounting the Analyzer 21
3.3.1 Primary Input Power 25
3.3.2 Fuse Installation 26
3.3.3 Analog Outputs 26
3.3.4 Alarm Relays 28
3.3.5 Digital Remote Cal Inputs 29
3.3.6 Range ID Relays 31
3.3.7 Network I/O 31
3.3.8 RS-232 Port 31
3.3.9 Remote Sensor and Solenoid Valves 33
3.4 Gas Connections 34
Operation ..................................................................................... 39
4.1 Introduction 39
4.2 Using the Controls 39
4.2.1 Mode/Function Selection 40
4.2.1.1 Analysis Mode 40
4.2.1.2 Setup Mode 40
4.2.2 Data Entry 42
4.2.2.1 ENTER 42
4.2.2.2 ESCAPE 43
4.3 The AUTO-CAL Function 43
4.4 The PWD (Password) Function 44
4.4.1 Entering the Password 44
4.4.2 Installing or Changing the Password 45