manualshive.com logo in svg

Telect LTX, Install Manual

Share
Download
Telect LTX Install Manual Download Page 3

© Telect, Inc.  All rights reserved. 148326 09.08.16
1.509.926.6000  ::  telect.com

3

LTX Patch and Splice Panel

LTX Patch and Splice Panel

Fiber :: Install guide

Table of Contents

 

   1    Introduction ...................................................................................................................................................... 5
         1.1    Specifi cations .......................................................................................................................................... 5
         1.2    About this Guide ...................................................................................................................................... 6
         1.3    Terminology ............................................................................................................................................. 6
         1.4    LTX Panel Overview ................................................................................................................................ 7

   2    Installation Considerations ............................................................................................................................... 9
         2.1    Inspection ............................................................................................................................................... 9
         2.2    Unpacking ............................................................................................................................................... 9
                  2.2.1   Contents .................................................................................................................................... 10
         2.3    Installation Guidelines .......................................................................................................................... 10
         2.4    Location and Space .............................................................................................................................. 10
         2.5    Tools and Equipment ............................................................................................................................ 10

   3    LTX Patch and Splice Panel Installation .........................................................................................................11
         3.1   LTX Panel Component Installation ..........................................................................................................11
                 3.1.1   Install Entry/Exit Arcs ...................................................................................................................11
                 3.1.2   Install Routing Spools...................................................................................................................11
                 3.1.3   Install Splice Trays ....................................................................................................................... 12
                 3.1.4   Install Tray Platform ..................................................................................................................... 12
                 3.1.5   Install Cable Clamp Bracket ........................................................................................................ 13
                 3.1.6   Install Cable Clamp ..................................................................................................................... 13
                 3.1.7   Install Central Strength Member Holder ...................................................................................... 13
                 3.1.8   Install Adapter Patch Plate .......................................................................................................... 14
                 3.1.9   Install Panel Doors ...................................................................................................................... 14
                 3.1.10 Install Designation Labels ........................................................................................................... 15
                 3.1.11 Install Mounting Brackets to the LTX Panel ................................................................................. 15
         3.2   Install and Ground the LTX Panel to the Rack ....................................................................................... 16

   4    LTX Patch and Splice Panel Cable and Fiber Installation and Routing .......................................................... 17
         4.1   Cable Installation and Routing ............................................................................................................... 17
                 4.1.1   IFC Cable Installation and Routing .............................................................................................. 17
                 4.1.2   Install IFC in the Cable Clamp ..................................................................................................... 18
                 4.1.3   Route Protected 12-Strand Ribbon Fiber in LTX Panel Slack Storage Area ................................ 18
                 4.1.4   Install Ribbon Fibers in the Splice Tray ........................................................................................ 19
                 4.1.5   Install Pigtail Fiber Connectors .................................................................................................... 20
                 4.1.6   Route Pigtail Fibers in the Splice Tray ......................................................................................... 21
         4.2   Splice and Route Fibers  ........................................................................................................................ 22
         4.3   Connect Fiber Jumpers at the Patch Panel ........................................................................................... 22

   5    Service ........................................................................................................................................................... 24
         5.1   Owner Maintenance............................................................................................................................... 24
                 5.1.1   High Insertion Loss and the Importance of Cleaning Connectors and Adapters ......................... 24
         5.2   Technical Support .................................................................................................................................. 25
         5.3   In-Warranty Service ............................................................................................................................... 25
         5.4   Out-of-Warranty Service ........................................................................................................................ 25
         5.5   Repacking for Shipment......................................................................................................................... 25

Summary of Contents for LTX



























Reviews:

No comments

Brands by name

Popular brands

Load more brands