Manual IP-Video Server
First Steps
GB
35
www.behnke-online.com
▸
Allow “Save picture”
*
enables the button
“Save picture” in the video screen. With this
option enabled, users get to save individual
pictures during a connected call (the picture
will contain a date and time stamp).
▸
“Save first image”
*
will result in the first
image of every call including a date and time
stamp and the server name to be save.
▸
“Path:”
*
provides path information on
where the image will be saved.
▸
“Store video”
will result in the video
including a date and time stamp and the
camera name automatically being saved
during a call (without voice recording).
▸
“Server IP address and port”
*
will show
the server to be used by the IP video software
to contact door intercom stations connected
in remote IP networks. This configuration is
necessary in case the IP video client and the
door intercom stations are not within the
same IP range.
▸
The IP video software constantly checks if
there is an image available at the set-up IP
video servers. Use the controller marked
“Sensitivity”
to adjust the image
recognition
.
In case the video image contains
a lot of noise, try moving the controller to
the right as the image will then only be
displayed during a connected call. In case
the camera image is rather dark and also
not visible during a connected call, try
moving the controller to the left in order to
increase sensitivity. The area to the right of
the controller indicates the value that would
result in the image being recognised as
“black”.
▸
In case you have previously selected to not
install the software into your autorun folder,
you may use the button
“Install Program to
Autorun”
to do so now.
▸
By selecting
“Delete configuration
completely”
you can return to the initial
settings of your computer. Any IP video
component will be deleted and the software
will be terminated.
▸
“Licensing...”
will open a prompt for you to
enter the purchased license key. The license
key is case sensitive.
