Manual IP-Video Server
First Steps
GB
33
www.behnke-online.com
2.3. Select AutoRun option
The software will prompt you to decide if it shall
be copied into the AutoRun folder, so that it can
start automatically after the user signs in:
▸
Select “Yes” to copy the software into the
AutoRun folder of the user currently signed in.
This selection does not require administrator
authorisation. The software will start, once
the current user has signed in.
▸
Select “Yes, for all users” to copy the software
into the AutoRun folder for all users on this
work station. The software will start every
time any user signs in at this work station.
This selection requires administrator
authorisation.
▸
Select “No” to withhold the software from
being copied into the AutoRun folder; it will,
however, check for AutoRun settings every
time the software is started, and where it is
not set to AutoRun, the software will show the
prompt shown above.
▸
Select “No, don’t ask me again” to withhold
the software from being copied into the
AutoRun folder; use this selection if you do
not wish to be prompted for the AutoRun
option again.
Click “OK” to validate your selection and to
move on to the software set-up interface.
