Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide –
Preliminary Version
Page 25
A
Belden
Brand
Area C – Signal/Data Indicators
The CopperHead 3400 Camera Unit Indicator Panel has a series of LED displays that monitor the
various signal paths between the Camera Unit and the Base Station.
For signals remain constant such as time code and video the LED remains on as a steady green.
For signals that fluctuate such as audio, the LED will reflect the varying signal activity. If the LED
is off either the signal has been lost or it is not in use.
The LED indicators on the left side of the panel indicate signal paths from the Base Station to the
Camera Unit. Right side LEDs indicate signal paths from the Camera Unit to the Base Station.
Note: the 3D-Dual Link Indicators are located on the reverse side of the Camera Unit adjacent to
the 3D-Dual Link SDI Connectors.
1) SDI Digital Video Signal
Monitors camera SDI Video to Base Station and SDI return video
to the Camera Unit (this is not the 3D-DLink signal)
2) VBS 1-3 – Analog Video Signals 1-3
VBS 1
is used for Camera Monitor video from the Camera Unit to
the Base Station and Return Video to the Base Station from the
Camera Unit
VBS SYNC
is used for Genlock (one way from Base Station to
Camera)
VBS PRMT (Prompter)
is used for Prompter Feed (one way from
Base Station to Camera)
3) Program Audio Channels 1/2 & 3/4
Monitors program audio from Camera Unit to Base Station and
return audio from Base Station to Camera Unit
For information about configuring the use of Tally in your system
please see Appendix 2
.
Summary of Contents for CopperHead 3400
Page 2: ......
