Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide –
Preliminary Version
Page 41
A
Belden
Brand
4.2.Mounting the Power Wafer Unit to the Copperhead 3400 Camera Unit
This example illustrates the use of a camera with a V-Mount battery system. Your system may differ. This
case illustrates a configuration where the camera is powered through the Power Wafer option. The Power
Wafer is powered through a Hybrid fiber cable which is powered from the CopperHead 3400 Base Station or
MPS External Power Supply.
Figure 18 - Mounting the Power Wafer Unit to the Copperhead 3400 Camera Unit
1) The CopperHead 3400 Camera Unit is mounted to the camera as described above on the
previous page.
2) The Power Wafer is attached to the CopperHead 3400 Camera Unit in place of the battery. It is
attached in the same manner as the camera battery.
3) When the Power Wafer is securely mounted to the
CopperHead 3400 Camera Unit you must connect the
supplied Power Wafer connector cable (2) between the
Power Wafer (1) and the Power Wafer connector on the
Camera Unit (15)
The Power Wafer to Camera Unit cable is supplied with the
CopperHead Power Wafer Unit
For configuration please see Chapter 5.
Summary of Contents for CopperHead 3400
Page 2: ......
