Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide –
Preliminary Version
Page 27
A
Belden
Brand
3.2.CopperHead 3400 Base Station
The CopperHead 3400 Base Station is available with a number of options. The unit is ordered with a
specified Power Module, Audio/Intercom Module and Fiber Connector. For an overall view of
component location please see the overall diagrams in Appendix 6.
CopperHead 3400 Base Station Front Panel
Figure 11 - CopperHead 3400 Base Station Front Panel
A) Optical Connector
See this Page (Front mounted Optional)
B) Audio/Data Indicators
See Page 28
C) Video/Data Indicators
See Page 28
D) Signal Strength Indicators/Setup
See Page 29
E) Status/Power Indicators
See Page 29
CopperHead 3400 Base Station Front Panel – Identifying Controls & Connectors
Area A – Front Panel Optical Connector (Optional)
Area A of the CopperHead 3400 Base Station provides for the
optional mounting of the Fiber Optical Connector on the front
of the Base Station instead of the rear of the Base Station.
For information on how to convert the Base Station from Rear
to Front Fiber Connector see Page 43.
Three types of Fiber Connectors are available for use with the CopperHead 3400 Base Station.
Typically one of these Fiber Connectors is pre-configured at the time of delivery.
OpticalCON
SMPTE 304M
Molex and STs
ST Connectors
Figure 12 - Fiber Connector Types
Blank Panel
Summary of Contents for CopperHead 3400
Page 2: ......
