Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide –
Preliminary Version
Page 36
A
Belden
Brand
MPS External Power Wafer Power Supply
The CopperHead MPS external power supply provides 95 watts of 12VDC power and fiber cable signal
connectivity from the Base Station to the Camera. From the MPS unit to the camera can be configured
using either a Hybrid OpticalCON connector or a SMPTE 304M connector. The length available is up to
780 feet or 240 meters.
From the MPS unit to the Base Station can be configured using a non-hybrid OpticalCON connector or
two ST connectors. The length available is up to 5 kilometers (3 miles).
The MPS is powered locally with standard AC power. The unit is free standing.
Figure 14 - MPS External Power Wafer Power Supply
All MPS Units require the Power Wafer to provide power to the Camera Unit. Four variations are
available with a different set of fiber cable connectors. All MPS units provide 95 watts of 12VDC power.
Part Number
Fiber Connection to Camera
Fiber Connection to Base Station
CH2-MPS-95VD-2ST-NEU
OpticalCON
2 STs
CH2-MPS-95VD-2ST-304
SMPTE 304M
2 STs
CH2-MPS-95VD-NEU-NEU
OpticalCON (with power)
OpticalCON (no power)
CH2-MPS-95VD-NEU-304
SMPTE 304 (with power)
OpticalCON (no power)
Table 3 - MPS Power Supply Adaptor Options
Summary of Contents for CopperHead 3400
Page 2: ......
