Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide –
Preliminary Version
Page 78
A
Belden
Brand
6.7.Shutting Down the System
System shutdown is simple. The only cautions relate to the Fiber Cable and to the Camera Remote
Control Panel Cable.
1. Camera Power and Camera Unit Power may be turned off at any time. If your system utilized
Hybrid Power these are one and the same.
2. To avoid the possibility of looking directly into an active fiber optic port or cable, turn both the
Camera Unit and the Base Station off before disconnecting the fiber from either point.
3. To avoid the possibility of damaging the Camera or Camera Remote Control Panel turn both the
Camera Unit and the Base Station off before disconnecting the Control Cable from the Control
Panel, the Base Station, the Camera Unit or the Camera itself.
4. Protect all cables from dirt, water entry and being dragged across the ground or other surface.
5. When re-spooling the cable take your time so as to avoid cable snags, crimps or damage to the
connectors. Re-spool evenly across the reel.
6. If the Base Station is a permanent or semi-permanent installation then simply power off and
disconnect and cap the Fiber Cable.
Summary of Contents for CopperHead 3400
Page 2: ......
