Appendix B: User Service Procedures
60
TLA700 Series Logic Analyzer Installation Manual
Preventive Maintenance
Once a year the electrical performance should be checked and the instrument
accuracy certified (calibrated). This service must be performed by a qualified
service technician using the procedures outlined in the appropriate service
manual for the Tektronix Logic Analyzer product.
Preventive maintenance mainly consists of periodic cleaning. Periodic cleaning
reduces instrument breakdown and increases reliability. Clean the instrument as
needed, based on the operating environment. Dirty conditions may require more
frequent cleaning than computer room conditions.
Refer to your logic analyzer probe instructions for specific cleaning procedures
for the probes and probe connectors.
The LCD flat panel is a soft plastic display and must be treated with care during
cleaning.
CAUTION.
Improper cleaning agents or methods can damage the flat panel
display.
Do not use abrasive cleaners or commercial glass cleaners to clean the display
surface.
Do not spray liquids directly on the display surface.
Do not scrub the display with excessive force.
Avoid getting moisture inside the instrument while cleaning the display; use only
enough solution to dampen the wipe.
Clean the flat panel display surface by gently rubbing the display with a
cleanroom wipe (such as Wypall Medium Duty Wipes, #05701, available from
Kimberly-Clark Corporation).
If the display is very dirty, moisten the wipe with distilled water or a 75%
isopropyl alcohol solution and gently rub the display surface. Avoid using excess
force or you may damage the plastic display surface.
Clean the exterior surfaces with a dry, lint-free cloth or a soft-bristle brush. If dirt
remains, use a cloth or swab dampened with a 75% isopropyl alcohol solution. A
swab is useful for cleaning in narrow spaces around the controls and connectors.
Do not use abrasive compounds on any part of the instrument.
Cleaning the Flat Panel
Display
Exterior Surfaces
