Basic Installation
TLA700 Series Logic Analyzer Installation Manual
3
If you have a TLA715 Portable Mainframe, install the expansion module in any
slot. If you install one or two expansion mainframes, you can install the
expansion module in slot 1 as shown in Figure 3 on page 4.
You can configure up to four expansion mainframes with the TLA715 Portable
Mainframe and up to ten expansion mainframes with a TLA721 Benchtop
Mainframe.
To install the expansion module complete the following steps:
1.
If the expansion module is not already installed in slot 0 of the expansion
mainframe, install it now.
CAUTION.
To avoid damaging the chassis, do not use the retaining screws to seat
the expansion module. These screws are intended for securing the module and
reinforcing the grounding.
2.
Seat the expansion module by pushing it into place.
3.
Use a screwdriver to tighten the retaining screws (maximum of 2.5 in-lbs).
Expansion mainframe
Benchtop mainframe
Figure 1: TLA721 Benchtop Mainframe with one TLA7XM Expansion Mainframe.
4.
Place the EXPANSION 1 label in the outlined area on the upper right side of
the expansion mainframe.