Basic Installation
20
TLA700 Series Logic Analyzer Installation Manual
Figure 15: TLA700 On/Standby switch locations
The expansion mainframe automatically powers on when the connected benchtop
or portable mainframe powers on. If everything is properly connected and
operational, you will see the expansion mainframe and the installed modules in
the TLA Application System window.
NOTE
. You must have a module installed in the expansion mainframe before the
expansion mainframe appears in the TLA Application System window.
To turn off the mainframes, press the On/Standby switch on the mainframe. Both
the portable and benchtop mainframes have a built-in soft power-down function
that safely powers down the mainframe when you press the On/Standby switch.
The expansion mainframes automatically power down when you turn off the
benchtop or portable mainframe.
Performing the Incoming Inspection
Incoming inspection consists of verifying the basic operation of the logic
analyzer. The power-on diagnostics check the basic functionality. The diagnos-
tics run every time you turn on the logic analyzer.
You can also verify more detailed functionality by running the self-calibration
and extended diagnostics.
Turning on the TLA7XM
Expansion Mainframes
Turning off the
Mainframes
