Restoring and Reinstalling Software
TLA700 Series Logic Analyzer Installation Manual
43
Change the BIOS Boot Settings.
Before installing the Hard Disk Image, you may
need to change the BIOS settings to enable booting the logic analyzer from the
CD-ROM.
1.
Restart the logic analyzer and then press function key F2 to enter the BIOS
setup.
2.
In the BIOS setup, go to the Boot menu.
3.
Set the Boot devices for your instrument as shown in Table 4 (follow the
on-screen instructions to change the settings).
Table 4: Bios Boot settings for reinstalling software from the CD-ROM
Instrument
Setting
TLA715 or TLA721
ATAPI CD-ROM Drive
+Removable Devices
+Hard Drive
4.
Save the settings by pressing function key F10 and confirm that you want to
save the new settings.
