TLA700 Series Logic Analyzer Installation Manual
1
Basic Installation
This chapter describes all of the steps needed to install your Tektronix logic
analyzer and its related accessories. It is written from the perspective that you
purchased most of the items uninstalled and you intend to install all of the
pieces. If you purchased a logic analyzer with modules already installed, you
should still review this chapter and perform the steps that apply to your situation.
Check the Shipment
Check that you have received all of the parts of your logic analyzer that you
ordered. Also check the following:
H
That you have the correct power cords for your geographical area.
H
That you have the correct probes and modules.
H
That you have all the standard and optional accessories that you ordered.
Fill out and return the customer registration card that is packaged with this
manual.
Environmental Considerations
Read this section before installing the logic analyzer. This section describes site
considerations, power requirements, and ground connections for your logic
analyzer.
CAUTION.
Allow a 5.1 cm (2 in) clearance on each side, 2.54 cm (1 in) at the
bottom, and 10.16 cm (4 in) at the back of the instrument to ensure proper
cooling. Inadequate clearances can cause the instrument to overheat and shut
down.
