Tektronix TDSUSB2, Manual

Page: 170 / 250

R-GPIB Commands
Sample Program
/* TDSUSB2
* This is a reference program to illustrate how to communicate with TDSUSB2
* using Remote GPIB facilities.
Typically, the application does the following steps:
1. Start up the application
2. Recall Full Speed Signal Quality setup
3. Run the measurement
4. Generate the report
5. Exit the application
For the current program, we will recall a setup file named as sqcsetup.
You can save setup files according to your own needs using the GUI based
interface of the application.
*/
#include <windows.h>
#include <stdio.h>
#include <stdlib.h>
#include "decl-32.h"
/* Forward Declarations */
int start_application(int scope);
int exit_application(int scope);
int do_single_test (int scope);
int recall_setup( int scope, char *filename);
156 TDSUSB2 Universal Serial Bus Measurement Package