Application Examples
Selecting and Configuring Measurements-Inrush Current Test
From the application menu, select Measurement> Select> Inrush Current.
Configuring the Measurement
Follow the steps to configure the selected measurement:
1.
From the application menu, select Measurement> Configure> Configure tab.
2.
Configure the following options:
Table 15. Configuring measurement
Option Set
to
Tier
Tier is always set to 1
V
BUS
Enter voltage measured across VBUS manually
Device Type
Hot Plug Attach
3.
Select the Source tab.
4.
Configure the following options:
Table 16. Configuring options
Option
Set
to
Live/Ref
Channel acquiring the signal
5.
Select Run.
Viewing Results-Inrush Current Test
To view the results of the tests, follow these steps:
1.
Run the application and from the application menu, and select Results>
Summary.
2.
Click any of the test result buttons to get the details of that test.
3.
From the application menu, select Results> Details.
4.
Click the Eye Diagram option in Results Summary or Results Details to
view the Eye Diagram.
5.
Click the Waveform Plot to view the annotated waveform plot.
TDSUSB2 Universal Serial Bus Measurement Package
93
Summary of Contents for TDSUSB2
