Tektronix TDS6404, Service Manual

Page: 34 / 252

Specifications
1- 14
TDS6000 Series Service Manual
Table 1- 6: Display specifications
Characteristic Description
Display type 211.2 mm (8.4 in) (W)
×
158.4 mm (6.3 in) (H), 264 mm
(10.4 in) diagonal, liquid crystal active-matrix color display
Display resolution 640 horizontal
×
480 vertical pixels
Pixel pitch 0.33 mm horizontal, 0.22 mm vertical
Response time, typical 50 ms, white to black
Display refresh rate 59.94 frames per second
Viewing angle, typical 80 degrees
Displayed intensity levels Supports Windows SVGA high-color mode (16-bit)
Table 1- 7: Input/output port specifications
Characteristic Description
Rear-panel I/O ports Ports located on the rear panel
SVGA video port Upper video port, DB-15 female connector, connect a
second monitor to use dual-monitor display mode,
supports Basic requirements of PC99 specifications
Parallel port (IEEE 1284) DB-25 connector, supports the following modes:
-standard (output only)
bidirectional (PS-2 compatible)
bidirectional enhanced parallel port (IEEE 1284
standard, mode 1 or mode 2, v 1.7)
-bidirectional high-speed extended capabilities
Serial port DB-9 COM1 port, uses NS16C550-compatible UARTS,
transfer speeds up to 115.2 kb/s
Keyboard port PS-2 compatible, oscilloscope power must be off to make
connection
Mouse port PS-2 compatible, oscilloscope power must be off to make
connection
LAN port RJ-45 connector, supports 10 base-T and 100 base-T
Audio ports Miniature phone jacks for stereo microphone input and
stereo line output
USB port Allows connection or disconnection of USB keyboard
and/or mouse while oscilloscope power is on
GPIB port IEEE 488.2 standard interface