Tektronix SPG8000A, User Manual

Page: 121 / 243

SPG8000A User Manual 107
Signal set Signals in the signal set Description
Black to White-7, Black to White-8,
Black to White-9, Black to White-10,
Black to Gray-1, Black to Gray-2,
Black to Gray-3, Black to Gray-4,
Black to Gray-5, Black to Gray-6,
Black to Gray-7, Black to Gray-8,
Black to Gray-9, Black to Gray-10
must install the enhanced signal sets to access these signals. (See
Table 39.)
Red-1 Field, Red-2 Field,
Green-1 Field, Green-2 Field,
Blue-1 Field, Blue-2 Field,
Cyan-1 Field, Cyan-2 Field,
Magenta-1 Field, Magenta-2 Field,
Yellow-1 Field, Yellow-2 Field Full-frame color flat fields representing the individual colors in the
SMPTE EG 432–1 color-accuracy patterns available under the
COLOR BAR button.
These signals are not part of the factory installed signal sets. You
must install the enhanced signal sets to access these signals.
Multiburst Multiburst pattern consists of five or six sine wave packets, each of
fixed frequency. This pattern is typically used for frequency
response testing for one or three video channels. The packets
have a 60% amplitude range upon a 50% level, therefore range
between 20% and 80% levels.
For comparison to these peak limits, flat pedestals at 80% and
20% levels are present on the left side of the pattern. The set of
packet frequencies used in each pattern is determined by the
maximum bandwidth of the output format.
For 4:2:2 YCbCr formats, one multiburst pattern consists only of a
Y channel signal, up to the maximum frequency limit, and the
second multiburst pattern is identical for all three channels, up to
half of the Y channel frequency limit.
For 4:4:4 formats, each multiburst pattern is identical for all three
channels.
Multiburst 0.5 – 2.75 MHz
(SD formats only) Three channel pattern with packet frequencies
of 0.5, 1.0, 1.5, 2.0, and 2.75 MHz.
Y Multiburst 0.5 – 5.75 MHz (SD formats only) Y channel pattern with packet frequencies of
0.5, 1.0, 2.0, 3.0, 4.0 and 5.75 MHz.
Multiburst 1 – 15 MHz (HD and 3G formats only) Three channel pattern with packet
frequencies of 1, 3, 6, 9, 12, and 15 MHz.
Y Multiburst 15 – 30 MHz (HD formats only) Y channel pattern with packet frequencies of 15,
18, 21, 24, 27, and 30 MHz.
Multiburst 15 – 30 MHz (4:4:4 and fast-progressive 3G formats only) Three channel pattern
with packet frequencies of 15, 18, 21, 24, 27, and 30 MHz.
Y Multiburst 35
–
60 MHz (Fast-progressive 3G formats only) Y channel pattern with packet
frequencies of 35, 40, 45, 50, 55, and 60 MHz.
Zone plate Circle, Diagonal Sine,
H Sine, H Sweep, V Sine, V Sweep,
Custom-1, Custom-2
Zone plate test signal with real-time parametric controls. These test
signals are listed in the Configure Zoneplate submenu. (See SDI
Configure Zoneplate submenu.)
Monitor ChromaDuMonde Color reference chart, used with permission of DSC Laboratories.
The pattern consists of a series of DSC standard color patches
representing the six primary colors, 18 evenly spaced intermediate
colors, and four skin tone reference patches. The 24 primary and