Tektronix Phasershare Printer, Networking Manual

Page: 34 / 184

26
PhaserShare Networking Manual
3
EtherTalk, LocalTalk, and TokenTalk Configuration
Finding the printer’s name in the Chooser
1.
From the Apple menu, select Chooser.
2.
In the upper-left corner of the Chooser, find the driver icon. (If the driver
icon does not appear in the Chooser, install the printer driver.) Click the
driver icon.
3.
If a list of zones appears in the lower-left portion of the Chooser, select the
proper zone.
4.
A list of printers appears in the right portion of the Chooser; find your
printer’s name in the list. The printer’s default name is listed on the
Configuration Page (see “The printer’s Configuration Page” on page 6). If
the name does not appear, check the cable connection between your printer
and the network.
N
O T E
The printer’s default zone is listed on the Configuration Page in the EtherTalk
or TokenTalk field. For more information on the Configuration Page, see “The
printer’s Configuration Page” on page 6.
N
O T E
It is possible for the Printer Name field on the Configuration Page to be blank.
When the printer is powered up, it uses a default name and then checks to see
that no other printer on the network has the same name. If enough printers
with the same default name are present it can take several minutes for the
printer to establish a unique name. If the name field is blank, wait a short time
and reprint the Configuration Page.