Tektronix Phasershare Printer, Networking Manual

Page: 167 / 184

PhaserShare Networking Manual 159
Disabling Protocols
15
6. To disable TCP/IP:
a.
Press the down-arrow button until
TCP/IP
is highlighted. Press
Select .
b.
Press the down-arrow button until
TCP/IP Interface
is
highlighted.
c.
Press Select until
Off
is displayed.
■
To return the printer to normal operation, press the down-arrow
button until
Exit
is highlighted. Press Select.
■
To disable other protocols, press the up-arrow button until
Previous Menu
is highlighted. Press Select. Continue with
Step 7.
7. To disable HTTP:
a.
Press the down-arrow button until
HTTP
is highlighted.
b.
Press Select until
Off
is displayed.
c.
To return the printer to normal operation, press the down-arrow button
until
Exit
is highlighted. Press Select.
Phaser 740 printer
1.
Press
Menu
; the front panel displays
Help Pages
.
2.
Enter the
Network Settings
menu by pressing
---->
or
<----
until
the front panel displays
Network Settings
.
3.
Press
Menu
; the front panel displays
TCP/IP
.
4. Disabling TCP/IP:
a.
Press
Menu
; the front panel displays
Interface
.
b.
Press
Menu
again to display the current status of the protocol:
Interface:Enabled
or
Interface:Disabled
. The current status
is marked with an asterisk (
*
) in the upper-right corner of the display.
c.
Press
---->
until the front panel displays
Interface:Disabled
.
d.
Press
OK
to disable the protocol; the front panel briefly displays
Selected
, then it displays
Interface
.
e.
Press Exit (the far left button) to return to the
TCP/IP
display.
N
O T E
When you are in the menu, if the front panel is not used for 5 minutes, the
printer returns to the
Ready state.