Tektronix Phasershare Printer, Networking Manual

Page: 105 / 184

PhaserShare Networking Manual 97
TCP/IP Configuration (OS/2 Warp/LAN Server)
9
5.
In the Print Destination section, make the following entries:
■
LPD server. The printer’s IP address.
■
LPD printer. The printer’s name. The printer’s name should be either
PS or AUTO in uppercase letters. It is recommended that you leave
everything else blank.
To return to the Create Printer dialog box, click OK; then click Create.
6.
Set the printer as your default printer:
a.
Click the right mouse button on the printer object.
b.
Click Set default, then select the new printer object.
OS/2 client-to-server setup
1.
Create a network printer object:use the right mouse button to drag the
Network Printer
template from the Templates folder; the Access another
network printer dialog box is displayed.
2.
In the Access another network printer dialog box, make the following
selections from the list boxes:
■
Network. Network protocol.
■
Server. Name of the server for the queue.
■
Resource. Name of the queue.
3.
Click the right mouse button on the network printer icon and select
Settings
from the menu; this displays the Settings dialog box.
4.
In the Settings dialog box, select the Printer driver tab. If the driver is
already installed, select the appropriate driver; if the driver is not installed,
you must install it:
a.
Click the right mouse button on any driver and select Install from the
menu.
b.
In the Printer Driver Selection section, select Other OS/2 printer
driver
, then specify the path to the driver.
c.
Click Refresh, then select the new driver from the list. Click Install.
Click OK; this creates a network printer object.