Tektronix Phasershare Printer, Networking Manual

Page: 48 / 184

40
PhaserShare Networking Manual
4
Novell NetWare Configuration
Setting IPX frame types from the front panel
Setting IPX frame types: Phaser 840
1.
When the front panel displays
READY TO PRINT
, press the down-arrow
button until
Menu
is highlighted. Press Select.
2.
Press the down-arrow button until
Printer Configuration
is
highlighted. Press Select.
3.
Press the down-arrow button until
Network Settings
is highlighted.
Press Select.
4.
Press the down-arrow button until
NetWare
is highlighted. Press Select.
5.
Press the down-arrow button until
IPX Frame Type
is highlighted. Press
Select .
6.
Press the down-arrow button until the desired frame type is highlighted.
Press Select until
On
is displayed. If desired, you can set more than one
frame type.
7.
To return the printer to normal operation, press the down-arrow button
until
Exit
is highlighted. Press Select.
Setting IPX frame types: Phaser 740 and Phaser 360 printer
N
O T E
If you are attempting to perform any front panel procedure and you don’t see the
expected menu choices, the front panel may be locked. For information on how to
unlock it, see “If the front panel is locked” on page 165.
1.
Enter the
Network Settings
menu:
a.
Press
Menu
; the front panel displays
Help Pages
.
b.
Press
---->
or
<----
until the front panel displays
Network
Settings
.
c.
Press
Menu
; the front panel displays
TCP/IP
.
2.
Access the menu of frame types:
a.
Press
---->
until the front panel displays
NetWare
.
b.
Press
Menu
; the front panel displays
Enable Interface
.
c.
Press
---->
; the front panel displays
IPX Frame Type
.
d.
Press
Menu
; the front panel displays the first in a menu of frame types.