Tektronix Phasershare Printer, Networking Manual

Page: 66 / 184

58
PhaserShare Networking Manual
7
TCP/IP Printer Configuration (All Platforms)
5. Set the IP address:
a.
Press the down arrow button until
IP Address
is highlighted. Press
Select .
b.
Press the left or right arrow buttons to highlight the 3-digit part of the
address that you want to set. Press the up or down arrow keys to
change the numbers.
c.
When the address is set, press Select.
6. Set the network mask:
a.
Press the down arrow button until
NW Mask
is highlighted. Press
Select .
b.
Press the left or right arrow buttons to highlight the 3-digit part of the
address that you want to set. Press the up or down arrow keys to
change the numbers.
c.
When the address is set, press Select.
7. Set the default router/gateway address:
a.
Press the down arrow button until
Default Router/Gateway
Address
is highlighted. Press Select.
b.
Press the left or right arrow buttons to highlight the 3-digit part of the
address that you want to set. Press the up or down arrow keys to
change the numbers.
c.
When the address is set, press Select.
8.
To return the printer to normal operation, press the down arrow button
until
Exit
is highlighted. Press Select.
Setting IP parameters: Phaser 740 printer front panel
N
O T E
When you set the IP addressing parameters from the front panel, the selections for
DHCP/BOOTP and RARP are automatically set to
Disabled
.
1.
Press
Menu
; the front panel displays
Help Pages
.
2.
Press
---->
or
<----
until the front panel displays
Network Settings
.
3.
Press
Menu
until the front panel displays
TCP/IP
.
4.
To set the IP address:
a.
Press
Menu
again; the front panel displays
Interface
.
b.
Press
---->
to display
TCP/IP Address
.