Tektronix Phasershare Printer Networking Manual Download Page 90

Page: 90 / 184

PhaserShare Networking Manual

TCP/IP Printer Configuration (All Platforms)

Setting SNMP parameters using a PostScript utility file

To create a PostScript file to control these parameters, use the script

config-SNMP

provided with the printer’s network utilities software.

Connect the printer to the network.

Run the script

config-SNMP

Change (cd) to the

bin

subdirectory in the directory where you placed

your printer’s network utilities.

Run the script, redirecting the output to a file. Type:

When prompted, provide the information for the SNMP utility.

Send the file named in Step 2b to the printer using lp or lpr.

config-SNMP >

filename

Summary of Contents for Phasershare Printer

























































































































































































Search results

Summary of Contents for Phasershare Printer

Reviews:

Related manuals for Phasershare Printer

Brands by name

Popular brands

Tektronix Phasershare Printer, Networking Manual

Search results

Summary of Contents for Phasershare Printer

Reviews:

Related manuals for Phasershare Printer

Brands by name

Popular brands