Tektronix Phasershare Printer, Networking Manual

Page: 37 / 184

PhaserShare Networking Manual 29
EtherTalk, LocalTalk, and TokenTalk Configuration
3
Changing the printer’s EtherTalk/TokenTalk zone (optional)
There are two ways to change the printer’s zone:
■
With a TCP/IP connection and a World Wide Web browser, you can use
PhaserLink Printer Management Software; see “Changing the printer’s
zone: PhaserLink Printer Management Software” on page 29.
■
You can also change the printer’s zone using PostScript utility files; see the
README files on the printer’s CD-ROM. The Macintosh README file is
in the Network Utilities folder; the PC README file is in the UTILS
directory.
Changing the printer’s zone: PhaserLink Printer Management Software
1.
From the printer’s home page, click Configuration; this displays the View
and Configure Settings
page.
2.
On the View and Configure Settings page, click View and Configure
Interface Settings
page.
3.
On the View and Configure Interface Settings page, click: View and
Configure EtherTalk Settings
, or View and Configure TokenTalk
Settings .
4.
In the Zone field, enter the desired zone.
For more information on PhaserLink Printer Management Software, see Chapter 12,
“PhaserLink Printer Management Software”.