Power-On and Power-Off Procedure
1.
Connect the oscilloscope power cable.
2.
Power on the oscilloscope.
3.
Connect the probe connector to the oscilloscope channel, and the probe tip
and reference lead to the
PROBE COMP
terminals on the oscilloscope
front panel.
NOTE.
Connect only one probe at a time to the probe comp terminals.
4.
Push a front panel button for an input channel connected to the probe you
wish to compensate. (
1
,
2
,
3
, or
4
)
5.
Notice on the lower menu that the oscilloscope has automatically set the
probe termination value.
6.
Push
More
repeatedly to select
Probe Setup
from the resulting pop-up menu.
7.
Notice that the compensation status starts as
Default
.
8.
Push
Compensate probe
and follow the instructions that appear on the
display.
MDO3000 Installation and Safety Instructions
25
