Power-On and Power-Off Procedure
6. USB 2.0 Host port
. Use the USB 2.0 High Speed Host port to connect a USB
memory device or USB keyboard.
7. Power
input. Attach to an AC power line with integral safety ground.
8. Lock
. Use to secure the oscilloscope.
Power-On and Power-Off Procedure
This instrument operates from a single-phase power source with the neutral
conductor at or near earth ground. The line conductor is fused for over-current
protection. A protective ground connection through the grounding conductor in
the power cord is essential for safe operation.
Power-On
1.
Connect the supplied power cord to the rear-panel power connector.
2.
Push the power button on the instrument front-panel and the instrument will
turn on.
NOTE.
The Standby button on the front-panel does not disconnect mains power.
Only the power cord at the rear of the product can disconnect mains power.
Power-Off
1.
Push the power button on the instrument front-panel to turn the instrument off.
2.
If you want to remove power completely, disconnect the power cord from the
rear-panel of the instrument.
22
MDO3000 Installation and Safety Instructions
