A Tour of Your Instrument
8.
Dedicated RF input with N-connector
9.
Analog channel (1, 2, (3, 4)) inputs with TekVPI versatile probe interface
10.
Digital channel input
11.
Display: shows frequency or time domain
12.
Arbitrary waveform generator (AFG) enable button
Rear-Panel Connectors
1. AFG OUT
. Use the AFG OUT port to transmit signals from the arbitrary
function generator.
2. AUX OUT
3. LAN
. Use the LAN (Ethernet) port (RJ-45 connector) to connect the
oscilloscope to a 10/100 Base-T local area network.
4. Video Out
. Use the Video Out port (DB-15 female connector) to show the
oscilloscope display on an external monitor or projector.
5. USB 2.0 Device port
. Use the USB 2.0 High Speed Device port to connect
a PictBridge compatible printer, or for direct PC control of the oscilloscope
using USBTMC protocol.
NOTE.
The cable connected from the USB 2.0 Device port to the host computer
must meet the USB2.0 speci
fi
cation for high speed operation when connected to
a high speed host controller.
MDO3000 Installation and Safety Instructions
21
