Tektronix H600 RFHawk, Service Manual

Page: 107 / 109

Speci fi cations
Table 6-5: Amplitude vs. Time measurement characteristics (cont.)
Characteristic Description
Acquisition Length
Range 1024 to 1024000 samples
36
μ s to 149 seconds, depending on span and number of samples
Span setting and number of samples selected determine the acquisition
length
Sample rate is automatically set based on span selection
Time Display Amplitude
Reference Level
Range and Units +20 dBm to –160 dBm
dBm, dBmV, dBuV, dBV, dBW, V, W
Marker Power
Accuracy ±1.8 dB, –50 dBm ≤ input ≤ +20 dBm, preamp off
± 3.0 dB, –75 dBm ≤ input < –40 dBm, preamp on, above 10 MHz
Display
Detector Types Average: One display point represents the average value of a group of
data points
+Peak: One display point represents the maximum value of a group of
data points
–Peak: One display point represents the minimum value of a group of
data points
+Peak/–Peak: One vertical bar represents the maximum and minimum
values of a group of data points
Trace Types Normal: updates display with each new result
Max Hold: updates displayed point only if new point > old
Min Hold: updates displayed point only if new point < old
Max/Min Hold: displays a vertical bar between Max Hold and Min Hold
Average: displays average of N (speci
fi ed by user) acquisitions
Number of
Averages 1 ≤ N ≤ 200
Export I/Q Data I/Q data from can be exported in the following formats:
IQT: in-phase and quadrature phase data for post-processing with
RSAVu
CSV: comma-separated values in ASCII format
MAT: Matlab®-compatible
fi le format
H600 & SA2600 Service Manual 6–7