Tektronix AWG70001A, Technical Reference

Page: 38 / 81

AWGSYNC01
AWGSYNC01
Electrical speci fi cations
Table 1-33: Electrical speci fi cations
Characteristic Description
System
Number of AWG70001A or
AWG70002A instruments
supported 4
All instruments must be the same model
Output to Output Skew
(typical) ±10 ps
Repeatability
(typical) ≤ 5 ps
Random Jitter on Clock Pattern
(typical) 0.315 ps rms
Total Jitter on Random Pattern
(typical) 13 ps
p-p
Calibration
Connector SMA at the Front Panel
Number of inputs 4
Input Impedance 50 Ω
Clock
Clock Output The external clock output is a copy of an external input clock into the sync hub. This output is
used to drive the external clock input of the AWG.
Number of Outputs 4
Connector SMA on rear-panel
Output Impedance 50 Ω AC coupled
Output Amplitude (typical) +5 dBm to +10 dBm
Frequency Range 6.25 GHz to 12.5 GHz
Clock Input The external clock input is used to create the DAC sample clock. This clock must always operate
in the octave range speci
fi ed below.
Connector SMA on rear-panel
Input Impedance 50 Ω AC coupled
1–22 AWG70000A Series and AWGSYNC01 Technical Reference