Tektronix AWG70001A, Technical Reference, Page: 28 / 81

Speci fi cations
Table 1-17: AC analog output (AWG70001A, Option AC) (cont.)
Characteristics Description
Band Pass
10 GHz to 14.5 GHz ± 3.5 dB
13 GHz to 18 GHz ± 4.5 dB
Harmonic distortion Measured with a balun.
Output Frequency
2nd harmonic
<1 GHz < –34 dBc
1 GHz to 4 GHz < –30 dBc
>4 GHz < –28 dBc
Output Frequency 3rd harmonic
<1 GHz < –50 dBc
1 GHz to 4 GHz < –45 dBc
Operating at 50 GS/s
No
fi lter
>4 GHz
< –33 dBc
Ampli fi er 1 dB compression AWG70001A operating at 50 GS/s
Output Frequency
Value
1 GHz > 25 dBm No fi lter
13 GHz > 22 dBm
Low Pass 1 GHz > 25 dBm
Band Pass (10 to 14.5 GHz) 11 GHz > 22 dBm
14 GHz > 22 dBm Band Pass (13 to 18 GHz)
18 GHz > 20 dBm
Switching time The time required for the attenuators and ampli fi ers to settle to the speci fi ed output amplitude
after an amplitude change.
20 ms
Table 1-18: Marker output
Characteristics Description
Connector type SMA on front panel
Number of outputs AWG70001A: 2
AWG70002A: 4
Type of output (+) and (–) complementary output
ON/OFF Control Independent control for each marker
Output impedance 50 Ω
Output voltage Independent control for each marker. Output voltage into RLOAD [ Ω ] to GND is approximately
(2 * RLOAD / (50 + RLOAD) ) times of voltage setting.
Amplitude range 0.5 V
p-p
to 1.4 V
p-p
into 50 Ω
Amplitude resolution 10 mV
Offset range 1.4 V – (amplitude ÷ 2) to –1.4 V + (amplitude ÷ 2) into 50 Ω
1–12 AWG70000A Series and AWGSYNC01 Technical Reference