manualshive.com logo in svg

Tektronix 222PS, Operator'S Manual

The Tektronix 222PS Operator's Manual is an essential resource for users of this high-performance product. This comprehensive manual provides detailed instructions, troubleshooting tips, and useful insights. Get your free download at manualshive.com, ensuring you make the most out of your Tektronix 222PS experience.

Share
Download
background image

At a Glance

222PS Operator Manual

2Ć15

5. This knob varies the brightness of the 222PS screen. See

page 3Ć23 for more information on screen brightness.

6. This is the external trigger common reference connector. To use a

grounded reference with your external trigger source, connect the

reference signal here. See page 3Ć65.

WARNING

To avoid possible injury, do not connect the trigger comĆ

mon reference input to voltages greater than 42ĂV peak.

The trigger common reference input is not insulated.

7. This is the external trigger input connector. To use an external

signal as a trigger source, connect the external trigger signal here.

For more information on external triggering, see page 3Ć65.

WARNING

To avoid possible injuryor damage to the 222PS or

equipment connected to it, do not float the external trigger

common connector, the RSĆ232 communications port, or

the external power input above 42ĂV peak. These inputs

are not electricallyisolated from each other.

8. This is the external power input. Connect the External Power AC

Adapter to the input to run the instrument from line voltage. See

page 3Ć41 for more information on external power.

At a Glance

222PS Operator Manual

2Ć15

5. This knob varies the brightness of the 222PS screen. See

page 3Ć23 for more information on screen brightness.

6. This is the external trigger common reference connector. To use a

grounded reference with your external trigger source, connect the

reference signal here. See page 3Ć65.

WARNING

To avoid possible injury, do not connect the trigger comĆ

mon reference input to voltages greater than 42ĂV peak.

The trigger common reference input is not insulated.

7. This is the external trigger input connector. To use an external

signal as a trigger source, connect the external trigger signal here.

For more information on external triggering, see page 3Ć65.

WARNING

To avoid possible injuryor damage to the 222PS or

equipment connected to it, do not float the external trigger

common connector, the RSĆ232 communications port, or

the external power input above 42ĂV peak. These inputs

are not electricallyisolated from each other.

8. This is the external power input. Connect the External Power AC

Adapter to the input to run the instrument from line voltage. See

page 3Ć41 for more information on external power.

Summary of Contents for 222PS









































































































































































































































Reviews:

No comments

Related manuals for 222PS

IBS Scherer M-500 Translation Of The Original Instructions preview
M-500
Brand: IBS Scherer Pages: 64
Gamry Instruments LPI1010 Operator'S Manual preview
LPI1010
Brand: Gamry Instruments Pages: 69
Gamry Instruments MultiPort Operator'S Manual preview
MultiPort
Brand: Gamry Instruments Pages: 30
Gamry Instruments Interface 1000 Operator'S Manual preview
Interface 1000
Brand: Gamry Instruments Pages: 88
Rayger Lite Instruction Manual preview
Lite
Brand: Rayger Pages: 2
Garmin PORTABLE ICE FISHING KIT Installation Instructions preview
PORTABLE ICE FISHING KIT
Brand: Garmin Pages: 5
Harman Martin ERA 800 Performance Safety And Installation Manual preview
Martin ERA 800 Performance
Brand: Harman Pages: 32
Harman Martin ERA 600 Performance Safety And Installation Manual preview
Martin ERA 600 Performance
Brand: Harman Pages: 32
Hardt INFERNO 4500 Operation Manual preview
INFERNO 4500
Brand: Hardt Pages: 22
Sabre PA-100 Quick Start Manual preview
PA-100
Brand: Sabre Pages: 2
natus ALGO 5 Installation And Assembly Instructions preview
ALGO 5
Brand: natus Pages: 20
natus Dantec Keypoint G4 Hardware Instructions For Use preview
Dantec Keypoint G4
Brand: natus Pages: 42
natus Madsen Zodiac Reference Manual preview
Madsen Zodiac
Brand: natus Pages: 149
JBSYSTEMS Light SE100 Operation Manual preview
SE100
Brand: JBSYSTEMS Light Pages: 17
Zimmer GED5000IL Series Installation And Operating Instructions Manual preview
GED5000IL Series
Brand: Zimmer Pages: 52
Cuisinart GRMC3E Original Instructions Manual preview
GRMC3E
Brand: Cuisinart Pages: 159
Power Dynamics DJ Laptop stand +tray Instruction Manual preview
DJ Laptop stand +tray
Brand: Power Dynamics Pages: 3
Irwin Powerbase S8 Instructions preview
Powerbase S8
Brand: Irwin Pages: 2

Brands by name

Popular brands

Load more brands