Triggering
In Detail
3Ć64
Trigger Source
The 222PS has the ability to use the signal from either channel as the
trigger source. An external signal from the external trigger input
connector can also serve as the trigger source.
To set the trigger source, follow these steps.
ĂĂStep 1:ă
Press the
SOURCE
button in the trigger control area. A
menu appears on the display, as shown in Figure 3Ć32.
VERT
TRIG SRC:
CH1
CH2
EXT
Figure 3Ć32:ăThe Trigger Source Menu
H
VERT
is the default trigger source and therefore appears
boxed unless you have previously selected another trigger
source. This menu item indicates that the instrument triggers
off the lowestĆnumbered active channel. If both channels are
off, the instrument is untriggered.
H
Selecting
CH1
specifies that the instrument use the signal
from channel 1 as the trigger source. Channel 1 need not be
displayed to serve as the trigger source.
H
Selecting
CH2
specifies that the instrument use the signal
from channel 2 as the trigger source. Channel 2 need not be
displayed to serve as the trigger source.
H
Selecting
EXT
specifies that the instrument use the signal
from the external trigger input as the trigger source.
Triggering
In Detail
3Ć64
Trigger Source
The 222PS has the ability to use the signal from either channel as the
trigger source. An external signal from the external trigger input
connector can also serve as the trigger source.
To set the trigger source, follow these steps.
ĂĂStep 1:ă
Press the
SOURCE
button in the trigger control area. A
menu appears on the display, as shown in Figure 3Ć32.
VERT
TRIG SRC:
CH1
CH2
EXT
Figure 3Ć32:ăThe Trigger Source Menu
H
VERT
is the default trigger source and therefore appears
boxed unless you have previously selected another trigger
source. This menu item indicates that the instrument triggers
off the lowestĆnumbered active channel. If both channels are
off, the instrument is untriggered.
H
Selecting
CH1
specifies that the instrument use the signal
from channel 1 as the trigger source. Channel 1 need not be
displayed to serve as the trigger source.
H
Selecting
CH2
specifies that the instrument use the signal
from channel 2 as the trigger source. Channel 2 need not be
displayed to serve as the trigger source.
H
Selecting
EXT
specifies that the instrument use the signal
from the external trigger input as the trigger source.
Summary of Contents for 222PS
