Overview
222PS Operator Manual
1Ć3
H
CAUTION
indicates a personal injury hazard not immediately
accessible as one reads the marking or a hazard to property
including the equipment itself.
H
DANGER
indicates a personal injury hazard immediately accessiĆ
ble as one reads the marking.
This symbol appears in manuals:
StaticĆSensitive Devices
These symbols appear on equipment:
DANGER
High Voltage
Protective
ground (earth)
terminal
ATTENTION
Refer to
manual
Specific Precautions
Observe all these precautions to ensure your personal safety and to
prevent damage either to the 222PS or to equipment connected to it.
Power Source
Ċ The 222PS can use its selfĆcontained sealed lead
acid battery as a power source. It can also operate using power
supplied to the external power input. Power supplied to this input must
be 12 to 28ĂVDC or 16 to 20ĂVAC
RMS
. Do not force either external
power conductor negative by more than 0.5ĂV with respect to chassis
ground. Both conductors of the external power input are fused interĆ
nally. These fuses are not user accessible.
You can operate the instrument with external power operation from
local 110ĂV or 240ĂV power supply using the appropriate external
power AC adapter. Use only external power AC adapters specified for
this instrument.
Overview
222PS Operator Manual
1Ć3
H
CAUTION
indicates a personal injury hazard not immediately
accessible as one reads the marking or a hazard to property
including the equipment itself.
H
DANGER
indicates a personal injury hazard immediately accessiĆ
ble as one reads the marking.
This symbol appears in manuals:
StaticĆSensitive Devices
These symbols appear on equipment:
DANGER
High Voltage
Protective
ground (earth)
terminal
ATTENTION
Refer to
manual
Specific Precautions
Observe all these precautions to ensure your personal safety and to
prevent damage either to the 222PS or to equipment connected to it.
Power Source
Ċ The 222PS can use its selfĆcontained sealed lead
acid battery as a power source. It can also operate using power
supplied to the external power input. Power supplied to this input must
be 12 to 28ĂVDC or 16 to 20ĂVAC
RMS
. Do not force either external
power conductor negative by more than 0.5ĂV with respect to chassis
ground. Both conductors of the external power input are fused interĆ
nally. These fuses are not user accessible.
You can operate the instrument with external power operation from
local 110ĂV or 240ĂV power supply using the appropriate external
power AC adapter. Use only external power AC adapters specified for
this instrument.
Summary of Contents for 222PS
