ENGLISH
TEKNO POINT ITALIA S.R.L. - VIA DELL’ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
MUI_CAIO_Ita_Eng_Fra_TP/Rev.06/Data 21.02.2022
61
In the event of damage to the equipmentcaused by failure to observe the points indicated in thismanual,
the manufacturerreserves the right to partially or totallycancel the guarantee. Ifyouhaveanyquestions,
please contact our technical department.
PRODUCT RECEPTION AND HANDLING
The equipmentissupplied on a wooden pallet and protectedby cardboard packaging. The following are
alsosupplied:
- Installation, use and maintenancemanual complete withwarrantyconditions and EC declaration
- Anti-vibrationfeet, water filter, gas fittings for indoor unit (inmodels wherenecessary).
- Documentation of the unit (inside its packaging).
- Connection diagram (adhesive label placed on the inside ofthe inspection panel).
Filling the coolant:
1. Use the specializedrefrigerant filling equipment forR32.
2. The refrigerant tank must be kept in vertical positionwhen the refrigerantisfilled.
3. Attach the label to the system after completing thefilling (or notfinishing).
4. Do notoverfill.
5. After filling is complete, perform leak detection.
Never force the machine to operate by tampering with or altering the safety devices
inside.
Do not start up with incomplete, provisional or precariouslymounted systems.
The Use and maintenance booklet is an integral partof the equipment;
itisrecommended to readit andto keepit with care. Remove the packaging onlywith
the equipment in the installation position. Oncethe packaging hasbeenremoved, the
handlingmust be carried out by qualifiedpersonnel and equippedwith
equipmentsuitable for the weight of the structure. Thehandling of the
condensingunitisallowedonly with theequipmentkept in a vertical position.
Do not dispose of packaging parts in the environmentor leavethemwithin the reach
of childrenasthey arepotential sources of danger. Dispose of the packagingaccording
to the regulations in force in the country.
