I N S TA L L ATION AND ADJUSTMENT MUST BE
CARRIED OUT BY AUTHORISED TECHNICAL
PERSONNEL ACCORDING TO THE APPLICABLE
INSTALLATION REGULATIONS.
Depending on the model to be installed an aper-
t u re will be made in the worktop, of the dimen-
sions specified in the drawing 11. A template is
included in the packaging of models CG.1 4G.
and CG.1 3G. 1P. for the correct sizing of the
a p e rt u re for these two hob models.
If the hob is installed above kitchen storage
units (cupboards, drawers, etc.), an interm e-
diate panel must be fitted.
For hobs with controls, its location must
include a ventilation slot at the front, of 110
c m
2
. In this case the minimum distance bet-
ween the lower part of the hob and the upper
p a r t of the furn i t u re below the hob will be 20
mm. If there is no front ventilation slot, the
minimum distance between the hob and the
upper par t of the furn i t u re must be 130
m m .The hob must be installed at least at 10
cm from its sides to any wall in the room.
The minimum ver tical distance of the lower
part of the piece of furniture placed above the
hob will be 600 mm.
The piece of furn i t u re where the hob with oven
is to be placed will be properly fixed.
Mod.: CG Lux-60 y CGC 4G
Mod.: CG.1 3G. 1P. y CG.1 4G.
Mod.: CG Lux-70
Mod.: CG Lux-75
Mod.: CG Lux-86
* In the case of the granite hob the measu-
rement can be 580 mm.
Installation
9
Positioning of the hobs
A
B
C
D
E
A
B
C
D
E
Impor tant
Drawing 11