Before connecting the hob to the power supply
check that the voltage and frequency are tho-
se indicated in the rating plate located on the
lower par t of the hob.
Remove the protecting plastic af fixed to the
hob, if any.
Pan suppor t supplement
Pan support
Burner cover
Burner head
Gas nozzle
Nozzle unit
N.B. Each time you assemble a burner, check
that all of its component parts fit together
c o rre c t l y. A badly positioned component may
cause the hob glass to overheat.
For hobs models CGC 4G, CG.1 4G. and CG.1
3G. 1P.
(See drawing 22).
• Check that the controls are in the corre c t
position.
• Open the mains connection gas tap or the
gas bottle cock.
• Put a lit match, lighter or flame, etc. next
to the burner if no automatic lighting is
available.
While keeping the burner control pressed, turn
it in anti-clockwise direction as far as it will go
until the maximum setting (large flame “C”).
The burner operates at that moment at full
power. Then, if desired, turn the control to the
minimum position (small flame “D”).
Burner indicator
Setting indicator
Off setting
Minimun gas setting
Maximun gas setting
Use and Maintenance
24
Special requirements
before first use
Component Parts of Gas Burners
C
A
B
D
E
F
A
B
C
D
E
F
Lighting of burners
Drawing 21
A
B
C
E
D
Drawing 22
A
B
C
D
E
