33
Fault
Possible Cause
Solution
Neither the hob nor the pilot light works.
The mains cable is not connected.
Connect the mains cable.
No spark appears
when the automatic ignition
switch is pressed.
Power is not reaching the plug.
Check /
repair the mains supply.
A spark appears but
the burner does not ignite.
The sparking plug and
Clean the end of the sparking
the corresponding burner zone
plug and the burner.
is dirty or coated with grease.
The burners do not ignite.
Gas is not reaching the hob.
Check that the gas bottle regulator
is correctly positioned
and open.
Open the gas connection
tap in the case of mains gas.
The burner ignites
but when the safety switch-
is released it goes out.
There is no flame in the
The gas burners blacken the pans.
thermocouple zone.
Clean the burner aper tures.
Burner aper tures dirty.
Clean burner aper tures.
Gas nozzle or diffuser dir ty.
Clean gas nozzle or diffuser
without using objects which
could damage or alter
the diameter of the gas
outlet orifice.
Before calling the Technical Service, make the
following checks:
Important
If Something Doesn’t Work
