FIGURE 4
UPPER HANDLE ASSEMBLY
Figure 21
: Return the Power10 to the in-use
position by pulling down on the Rear Handle
and rotating on the Transport Wheels until
the Rear Linkage is resting on the ground .
IMPORTANT:
Use caution to ensure the
Cable that attaches the Upper Left
Handle to the Base does not get pinched or
pulled during assembly .
Figure 22
: Slide the Upper Left Handle into
the top of the Lower Left Handle and align
the screw holes .
Figure 23
: Use the
Step 10 Hardware Kit
to attach the Upper Left Handle .
Hand tighten 4 × Bolts through the Upper
Left Handle and into the Lower Left Handle .
Proceed to fully tighten all 4 × Bolts with
the 4mm Allen Wrench .
13
Figure 21
Figure 22
Figure 23
Bolt
(M6 x 15)
Step 10 Hardware Kit
