FIGURE 4
LOWER HANDLE ASSEMBLY
Figure 15a & 15b
: While the Power10 remains
tipped upward, align the Lower Left Handle with
the Handle Support Bar on the Rear Linkage .
Figure 16
: Use the
Step 7 Hardware Kit
to attach
the Lower Left Handle to the Handle Support Bar .
Hand tighten 4 × Bolts with 4 × Washers through the
Lower Left Handle and into the Handle Support bar .
DO NOT
fully tighten the bolts with the wrench
at this time . This will be done later in the
assembly process .
10
Washer
(M8)
Figure 15b
Figure 15a
Figure 16
Step 7 Hardware Kit
Bolt
(M8 x 20)
