Figure 17a & 17b
: Slide the base of the Lower Right
Handle over the base of the Lower Left Handle until it
aligns with the Handle Support Bar .
Figure 18
: Use the
Step 8 Hardware Kit
to attach
the Lower Right Handle to the Handle Support Bar
and Lower Left Handle .
Hand tighten 5 × Bolts with 5 × Washers through the
Lower Right Handle and into the Handle Support Bar
and Lower Left Handle .
Proceed to fully tighten all 9 × Bolts that attach the
Lower Handles to the Handle Support Bar with the
6mm Allen Wrench .
11
Figure 17b
Figure 17a
Figure 18
Step 8 Hardware Kit
Washer
(M8)
Bolt
(M8 x 20)
Bolt
(M8 x 45)
