9
FIGURE 4
FINISH BASE ASSEMBLY
Figure 12
: To have better access while
proceeding to the next steps of assembly,
position the Power10 to rest on its front side
by lifting up on the Rear Handle and rotating
on the Transport Wheels until the Foot
Platform is resting on the ground .
Figure 13
: Use the
Step 6 Hardware Kit
to
finish assembling the Base Joint .
Hand tighten 4 × Bolts with 4 × Washers on
the Platform Joint .
Figure 14
: Proceed to fully tighten all 8 × Bolts
on the Base Joint with the 6mm Allen Wrench .
Use caution to avoid injury or tipping
when lifting heavy objects .
CAUTION
!
Figure 12
Figure 13
Figure 14
Lift and Flip
Step 6 Hardware Kit
Bolt
(M8 x 20)
Washer
(M8)
